Blade | 67-Layer Damascus Steel
Layered steel with a flowing pattern. The pattern varies slightly from blade to blade.
A kitchen knife with a blade of approx. 13 cm (5.1 in): 67-layer Damascus steel, a 15° V-edge and a black wood handle with a steel bolster.
Pickup currently not available
Made with 67-layer Damascus steel that brings a flowing pattern to each and every blade.
A thin 15° V-edge that cuts cleanly through tomatoes, herbs and onions. A thinner edge angle than the roughly 20° of a typical kitchen knife.
A rounded handle in black-stained wood, paired with a steel end cap.
A steel bolster and a multicolor decorative ring sit where the blade meets the handle.
Wash with lukewarm water and mild dish soap, then dry right away. Not dishwasher safe.
A knife with flowing-pattern 67-layer Damascus steel, a 15° V-edge and a rounded black wood handle with a steel bolster, multicolor decorative ring and steel end cap. Each knife is delivered in its own box.
Tested PFAS-free.
| Blade | 67-layer Damascus steel |
|---|---|
| Edge | 15°, V-edge |
| Handle | Black-stained wood, steel bolster, multicolor decorative ring, steel end cap |
| Blade length | Approx. 13 cm (5.1 in) |
| Overall length | Approx. 21.8 cm (8.6 in) |
| Blade height | Approx. 4.8 cm (1.9 in) |
| Spine thickness | Approx. 2.5 mm (0.1 in) |
| Weight | Approx. 235 g (8.3 oz) |
1 kitchen knife (boxed)
67-layer Damascus steel, finished with a 15° edge.

Layered steel with a flowing pattern. The pattern varies slightly from blade to blade.
A thin V-edge that delivers clean, precise cuts.
A rounded black-stained wood handle, paired with a multicolor decorative ring and a steel end cap.
A rounded black wood handle, accented with steel at both ends.

A rounded handle with a fine, dark grain.
A slim colored ring set between the bolster and the handle.
Polished steel where the blade meets the handle.
The piece that finishes the end of the handle.
Real Damascus steel, compared with the knives you know.
| Feature |
BEST CHOICE Puredur Damascus 67 67-Layer Damascus Steel
|
Etched "Damascus" Printed on Ordinary Steel
|
Typical Stainless Steel Ordinary Steel Knife
|
|---|---|---|---|
| Real layered steel, not printed |
✓
|
✕printed on the surface
|
✕a single steel
|
| Pattern runs through the steel |
✓
|
✕surface only, may fade
|
– |
| Number of steel layers | 67 | 1 | 1 |
| Thin 15° edge |
✓15° per side
|
Varies by product |
−only (most are about 20°)
|
| Gift box included |
✓
|
Varies by product | Varies by product |
Swipe to compare →
Compared with typical knives in each category. May vary by brand and product.
A few habits keep the edge sharp and the handle beautiful.
Wash with lukewarm water and mild dish soap, and wipe dry after every wash.
A dishwasher dulls the edge and damages the handle too.
This blade is built for clean, precise cuts. Do not use it on bones or frozen food.
The Damascus pattern varies slightly from blade to blade, so no two look exactly alike. The handle is the same black wood design on every knife.
No. Hand wash with lukewarm water and mild dish soap, then dry right away.
Touch up the edge regularly with the Rolling Knife Sharpener.
No. This blade is built for clean, precise cuts. Do not use it on bones or frozen food.